• No products in the cart.

Coronavirus disease (COVID-19): Online Training

In order to assist UN country teams in scaling up country preparedness and response to COVID-19, WHO has developed these learning modules

1. COVID-19: Operational Planning Guidelines and COVID-19 Partners Platform to support country preparedness and response

In order to assist UN country teams in scaling up country preparedness and response to COVID-19, WHO has developed these learning modules as a companion to the Operational Planning Guidelines to Support Country Preparedness and Response.

The training is intended:

  • For UN country teams (UNCTs)
  • For other relevant stakeholders, including partners, donors and civil society
  • To support national readiness and preparedness for COVID-19
  • To help countries increase their capacity to respond to COVID-19
  • To increase international coordination for response and preparedness
  • To streamline the process of coordinating resources and assessing country preparedness level

This learning package consists of 3 modules with videos and downloadable presentations.

2. Infection Prevention and Control (IPC) for novel coronavirus (COVID-19)

This course provides information on what facilities should be doing to be prepared to respond to a case of an emerging respiratory virus such as the novel coronavirus, how to identify a case once it occurs, and how to properly implement IPC measures to ensure there is no further transmission to HCW or to other patients and others in the healthcare facility.

This training is intended for healthcare workers and public health professionals, as it is focused on infection prevention and control.

3. Introduction to emerging respiratory viruses, including novel coronavirus

Coronaviruses are a large family of viruses that are known to cause illness ranging from the common cold to more severe diseases such as Middle East Respiratory Syndrome (MERS) and Severe Acute Respiratory Syndrome (SARS).

A novel coronavirus (COVID-19) was identified in 2019 in Wuhan, China. This is a new coronavirus that has not been previously identified in humans.

This course provides a general introduction to COVID-19 and emerging respiratory viruses and is intended for public health professionals, incident managers and personnel working for the United Nations, international organizations and NGOs.

4. Clinical Care Severe Acute Respiratory Infection

This course includes content on clinical management of patients with a severe acute respiratory infection.

It is intended for clinicians who are working in intensive care units (ICUs) in low and middle-income countries and managing adult and pediatric patients with severe forms of acute respiratory infection (SARI), including severe pneumonia, acute respiratory distress syndrome (ARDS), sepsis and septic shock. It is a hands-on practical guide to be used by health care professionals involved in clinical care management during outbreaks of influenza virus (seasonal) human infection due avian influenza virus (H5N1, H7N9), MERS-CoV, COVID-19 or other emerging respiratory viral epidemics.

5. Health and safety briefing for respiratory diseases – ePROTECT

This course provides a general introduction to Acute Respiratory Infections (ARIs) and basic hygiene measures to protect against infection. By the end of the course, you should be able to describe basic information about ARIs including what they are, how they are transmitted, how to assess the risk of infection and list basic hygiene measures to protect against infection.

Covid-19 - Coronavirus | Online Training
Covid-19 – Coronavirus | Online Training

 

TO ACCESS COURSES IN ADDITIONAL LANGUAGES, PLEASE VISIT OUR COVID-19 LEARNING CHANNELS ON OPENWHO.ORG

March 28, 2020

0 responses on "Coronavirus disease (COVID-19): Online Training"

Leave a Message

DIYguru is India’s favorite upskilling platform for learners benefiting more than 50,000 enthusiasts across 400+ institutions through our online courses and hands-on training to acquire industry relevant skills. Our programs have been trusted by Robert Bosch, Suzuki, and Hyundai to name a few.

Recognised by

 

Reach Us

  +91-124-428-4038
 support@diyguru.in

 

Success Stories

DIYguru Success Stories

Validate Certificate

Subscribe Newsletter

Online Course, Trainings and Industry 4.0 Skills at DIYguru Learning Platform

  1. For Students:ITI / Diploma / B.Tech / M.Tech. / M.S. Research (Mechanical, Electrical, Electronics & EEE Branch)

    FUNDAMENTALS: For First & Second-year students, who are new to science and engineering and are looking to boost their CV / Resume to stand out of the crowd in getting Internships and preparing base for making their future in Automotive & Product Development Industry, the best strategy will be to go with Fundamental Job oriented Certification Courses which includes Fundamentals of Automobile Engineering, Fundamentals of Python for Mechanical Engineers, Motorcycle Engineering Fundamentals, Electrical Machine Fundamentals Training, MATLAB Fundamentals & Additive Manufacturing Fundamentals.

    INTERMEDIATE: For Third-year students who are planning about making their career through Campus Placements in Automotive (Original Equipment Manufacturers – OEMS’s & Electric Vehicle) & Product Development Industry the best strategy, if they have cleared their Job oriented Fundamental DIYguru Certification Courses which we have recommended above for sophomore students would be to go with the Job oriented Electric Vehicle Engineering Nanodegree Program, Vehicle Dynamics, MATLAB, CATIA / Solidworks for CAD and ANSYS – CAE for structural analysis and MSC Adams for Multibody Dynamics Analysis like Suspension and other moving automotive body part and finally Automotive Sketching to boost your knowledge of concepts and software required for Automotive Industry and OEM’s, This will also unable you to boost your resume. Third years is considered vital for your career growth and you can make the best use of time by adding as many certifications in your resume as possible to stand out of the crowd.

    ADVANCED: For Final year students, as they are about to appear for Mechanical Engineering companies interview mainly Automotive / Automation & Product Manufacturing companies, it is best suggested to go withJob oriented Advanced Electric Vehicle Engineering Course and Battery Management System Course if they have already gone there thinking about making their career in EV sector which is growing exponentially and is about to generate 25 lakh jobs by 2025. Electrical & Electronics Engineering students along with Electric Vehicle Fundamental & Advanced Module should go for added Labview Course as well as Specialization in DATA Analytics with Python to have a firm understanding of the subject and open a wide variety of career option in Industrial automation (Industry 4.0)

    For students who have passed out from Engineering / Technology / ITI / Diploma background and are looking to enter into Automotive or Product manufacturing/development industry making sure that they land a job after doing DIYguru Job oriented course.The best use of this platform would be to go with The Job Guaranteed Program or the Job Assistance Program which will enable you to go extensively through the modules to be completed in a particular time frame.

    For Professionals

    For Entrepreneurs who are looking to develop an electric vehicle from beginning till the end of the Product lifecycle i.e. right from the Planning phase and preparing the basic concept note to Market Research to Designing and Analysis of different Electric Vehicle OEM parts and then simulating the components in different software obtaining thermal and fatigue profiles and finally rendering the finished prototype and putting it into manufacturing phase, we have prepared a bundled Industry 4.0 pack which you can buy here – Industry 4.0 Course Package consisting of all required courses with lifetime access.

    For Working Professionals (Employees, HR’s / Managers / Engineers / Professors) who are looking to upskill themselves in Industrial automation and product manufacturing. They can opt for any of the following courses based on their requirements in the industry which they are currently working or looking forward to.

    For Hobbyists who belong from a non-tech background (Commerce / Arts / Law / Hospitality)

    All the courses on the DIYguru platform are project-oriented i.e. after successful completion of any course, you are able to create something out of it, for ex. if you are looking to make an electric car/bike of yourself. We would suggest you go with the Electric Vehicle Engineering Course which will enable you to retrofit a petrol/diesel variant into an electric one. If you are looking to design a super finished model of Buggati Veron, go for the Solidworks course. If you are good at arts and sketching go for the Automotive Sketching course. In case you are looking to repair or troubleshoot your bike/scooter consider opting for Motorcycle Engineering Course. In case you want to start your future journey of beginning a career in Automobile industry you can opt-in this particular manner

     

 

Professionals from 70+ Companies use DIYguru Platform for Upskilling

 

 

Professionals from 70+ Automotive Companies Use DIYguru Platform for Upskilling

 

top
Copyright © DIYguru Education & Research Pvt. Ltd.
WhatsApp Support whatsapp